Auto Club TCNA

When you start using ATV, it almost means graphics. To those who are already a long-time ATV owners, you should know what I am referring to. For those who only had it a couple of weeks or are just planning to buy one, graphics is the best way to personalize your ATV without tweaking too much.

You can easily find some by looking into Motorcycle Parts Accessories shops as they are practically just there lying around. Installing them, however, is the tricky part because you cannot just stick it there like a Ben 10 sticker on your mom’s fridge. You need precision to make sure no bubbles would come out and the stick is firm.

Also keep in mind that putting the graphics in a warm area is good. If you are in a warm area, the graphics or even the number plate backgrounds become more workable and easier to install. Make sure that before you even start, clean the surface area and dry it up so you would not have any extra problems sticking your graphics. Remove all dirt, grease, or dust on the body plastic to make sure that the sticker will stick well.

A trick you can use so you can move the graphics around and position it wherever you want is to make a soapy solution of water and around 2-3 drops of Johnson and Johnson baby shampoo in it. Get a spray can and put your solution in it. Then, when the graphic is ready, spray your solution on the surface where you would put the graphics until it is medium wet before stick the graphic.

Heat the stick with a hair dryer first until it is warm. Next, peel back a small section from the leading edge of your graphics and never peel back the whole thing, otherwise, it would be one hell of a job trying to position the whole thing on the ATV body. Use polaris ATV parts for great graphics.